Zeiss Stemi 508 Operating Manual

Also see for Stemi 508: Operating manual

Zeiss Stemi 508 Operating Manual Manual pdf 21 page image

Stereo microscope INSTALLATION ZEISSStemi 508 General information06/2015 435064-7044-010 19English3 INSTALLATION3.1 General informationBefore installing and commissioning the device, make sure to read the Notes on instrumentcarefully (see Section 1.2, page 4).The Stemi 508 with the necessary tools and optional equipment is delivered in several standard packages.• Take all units out of the packaging and check them for completeness according to the delivery note.For installation and/or transport of the microscope or the stand, exclusively use the handle(Fig. 3/5) provided to this effect.• Remove transport securing devices (adhesive tapes etc.).• Keep original packaging for a possibly extended period of storage or return of the device to themanufacturer or dispose of it appropriately.3.2 Installing the stereo microscope• Place stand (Fig. 7/3) on a level, firm support.• If the Stemi 508 body (Fig. 7/2) has not yetbeen mounted, insert it in the Stemi mount(Fig. 7/4), align it and secure it using theclamping screw (Fig. 7/5).The appropriate Allen key (Fig. 7/8) is located inthe support on the back of the device.• If the two eyepieces (Fig. 7/1) have not yet beenmounted, insert them both to their stop in theeyepiece tube.• Remove the two caps (Fig. 6/1) from theeyepieces.• Remove the cap (Fig. 6/2) from the specimen byturning it. Fig. 6 Removing caps