Zektor HDS4.2 Owner's Manual

Contents

Zektor HDS4.2 Owner's Manual Manual pdf 11 page image

11S TEP 12 12 After a pause, the Power indicator blinks 7 times, and repeats.Press the key on your remote that you want to use as the new keyfor P OWEROFF.7 BLINKSS TEP 13 13 The HDS4.2 will return to the standby mode indicating a return tonormal operations. The newly programmed codes will now operateyour HDS4.2.Remote Control Learning CaveatsSome component’s control codes will work better than others. We’ve designed the HDS4.2 to workwith a great majority of codes, however a few brands use non-standard ways of transmitting theircomponent’s codes that may not be compatible with the HDS4.2. In these somewhat rare circum-stances you will have to program your remote control to a different manufacturer’s code, and/or usedifferent buttons on your remote.When programming the HDS4.2, if the IR indicator light blinks, and the HDS4.2 moves on to thenext step, then the remote controller’s key code has been accepted. If the IR indicator does notblink, it indicates the HDS4.2 does not understand that particular manufactures code and you willhave to choose another.In some cases the remote key code will be accepted, however the range will be limited. If the rangeof a programmed key is unacceptable, you will have to choose a different manufacturer and tryagain.4321ZEKTOR4321ZEKTOR