Zenith 206-3923 Operating Manual
                                  | |
Contents
| 
10The exact arrangement you use to interconnect various video and audio components to the TV is dependenton the model and features of each component. Check the Owner’s Manual provided with each component forthe location of video and audio inputs and outputs.The connection diagrams below are offered as suggestions. You may need to modify them to accommodateyour particular assortment of components. The diagrams are intended to show component video and audiointerconnections only.To connect the TV to a VCRTo connect the TV to a VCR with an S-Video cordIf you connect a VCR with a S-VIDEO cord to the S-VIDEO IN jack on the rear of the TV, you must also connectthe audio cords to the AUDIO IN jacks on the rear of the TV. The S-VIDEO cord only carries the video signal.The audio signal is separate.NOTE:When the S-video cord and the video cord are connected to each jack at the same time, the S-video cord takesprecedence over the video cord.To connect the TV to a DVD player/Satellite receiverIf your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.Connections to other equipmentTo S-VIDEO OUTAUDIO cord (not supplied)To AUDIO OUTTo AUDIO INRear of the TVS-VIDEO cord (not supplied)To S-VIDEO INRear of the TVTo S-VIDEO OUT To AUDIO OUTAUDIO cord (not supplied)S-VIDEO cord (not supplied)To S-VIDEO INTo AUDIO INRear of the TVTo AUDIO/VIDEO OUTAUDIO/VIDEO cord (not supplied)To AUDIO/VIDEO IN |
Related manuals for Zenith 206-3923
manualsdatabase
Your AI-powered manual search engine