Zenith B25A11Z Operating Manual

Also see for B25A11Z: Service guidelines Operating guide

Contents

Zenith B25A11Z Operating Manual Manual pdf 13 page image

The source button (TV/VCR/SOURCE) on the remote switches betweenthe Video input and Cable/Antenna input. On some models, the A/Vinput is designated as a channel that is one below the lowest/oneabove the highest. You’ll have to use the Channel Up/Down buttons toaccess it. The Time/Channel display will read “Video” in place of achannel number.Cable/Antenna Input: This setting allows you to change cable orantenna channels and to view videocassettes on channel 3 (or 4)in mono sound.Video Input: This setting allows stereo playback of videocassettes. Thetelevision cannot change channels in the Video mode, but the VCR can.To view the current input source, press ENTER on your remote.The Time/Channel display should appear in the upper righthand corner of the screen. If the display reads ‘Video,’ then thesource is an A/V input. If the display reads a channel number,then the source is your Cable or Antenna.CHANNEL UP/DOWN arrows: Use these arrows to change the channels.Auto program will have found all channels available to you.NUMBER Key Pad: To skip to any channel, enter the number of thechannel using the NUMBER key pad, then press ENTER.FLASHBACK: To instantly return to the last channel viewed,press FLASHBACK.Volume Right/Left: To adjust the volume level, use the volumeRight/Left arrows. To silence your Entertainment Machine instantly,press MUTE once. To get the sound back, press MUTE again.P A G E 1 3Channel ChangingAudioCH 1210:55MONOChannel or Video(Indicates Source)TimeAudio ModeSourceIntroducing you to the basics of your Entertainment Machine.This is an example of the Time/Channeldisplay that appears in the top corner ofyour screen.Basic Television Operation206-3477