Zenith B25A30ZC Operating Manual

Also see for B25A30Z: Operating guide

Contents

Zenith B25A30ZC Operating Manual Manual pdf 8 page image

AP A G E 8Hook Up Your Antenna and VCRIf you have a 75 ohm RF cable,then you don’t need any adapters!Remember, when screwing RFcables onto jacks, clockwise tight-ens, and counterclockwise loosens.Locate the Antenna/Cable jack onthe back of your EntertainmentMachine.Connect the cable that runs fromthe wall directly to this jack,according to the diagram to theright.Remove the back of the remoteand put in two AAA batteries.Plug in your EntertainmentMachine. Do not plug it into aswitched outlet. YourEntertainment Machine isdesigned to operate on house-hold current, 120-volt 60 HertzAC do not attempt to operate iton DC Current.Go to page 10 to Auto Programyour Entertainment Machine.12345Connect a VCR to your Entertainment Machine.back ofremoteTV back panel(expanded view)AntennaCableTV backInOut AudioVideo3 4VCR backVCR back AV panelFlat wire(300 ohm)AntennaRF coaxial wire(75ohm)not includedwith TVoutputswitchAudio In VideoA/V cablesnot includedwith TV206-3480TV back panel(expanded view)AntennaCableTV back RF coaxial wire(75ohm)not includedwith TVAudio In VideoA/V cablesnot includedwith TVInOut AudioVideo3 4VCR backVCR back AV paneloutputswitchRF coaxial wire(75ohm)AntennaFlat Wire Antenna with VCRAntenna with VCRNote: You will need to connect a VCR toyour television in order to use thePicture-In-Picture feature. (See page 29to set the signal source for your PIP)