Zenith B27B40Z Operating Manual & Warranty

206-3375P A G E 4 2Remote Control Auto FindMini glossaryAUTO FIND Another way of finding a brand code for controlling auxiliary equipment such as a VCR, DVD player, etc. that is notavailable through the regular remote brand code programming method.123456You can quickly get out of Auto Find by pressing PRG.If the indicator light stays on while you press Power instead of turn-ing off, all the codes have been tried and your device can’t be con-trolled.Use Auto Find to automatically search and try all possible brand codesPRG POWERCABLE VCR AUX TVSURFENTERFLASHBK MUTECHANNELCHANNELVOLUME VOLUME1 2 34 5 6708 9MENUREWIND FFWDRECORDQUITPIPPIP chFREEZCCTV/VCRSOURCEPAUSE TIMERPLAYSTOPTurn on the device you want the remote to control.Press and hold PRG until the indicator light turns on,then release PRG.Press the key for the device you are trying to program(CABLE, VCR, AUX, TV).Press 0-0-0 (zero-zero-zero), then press ENTER right away.Aim the remote at the correct device and push the POWERkey (The indicator light will turn off while the POWER key ispressed). Allow a second to pass, then push the POWER keyagain. Repeat until the device turns off.Push ENTER to save the code (The indicator light will flash 3times and then turn off).Press POWER to turn the device back on.74 4/632Indicator Light 5/7