Zenith D27B48T Operating Manual & Warranty

206-3483-AP A G E 1 2Transcast System ConnectionA/V cablesare not includedwith TVR-L AudioInputStereo SystemTypicalTV backCOMPONENT VIDEOY CR CB R LS-VIDEO 1 VIDEO 1 R-AUDIO L-/MONOVARIABLEAUDIO OUTPUTRLS-VIDEO 2 VIDEO 2 R-AUDIO L-/MONOPhone InLocate the jacks marked R - L VARIABLEAUDIO OUTPUT. These are for the stereo sys-tem. Connect the stereo system’s cables,according to their color (red is for the rightchannel, white for the left channel) tothese jacks.1Before you begin plugging in your stereo system, it’s agood idea to put it in its approximate place first. Thatway you know how much wire you have or will need.Use your stereo to play the soundfrom your Entertainment MachineLocate the jack marked “Phone In”. Thisinput is for the telephone line. Insert thetelephone line into the Phone In jack.Install two high-quality alkaline “AA” bat-teries into the keyboard.Note: Plan on placing the keyboard to allowfor an unrestricted path for the IR signalsto reach the front panel of the TV.IR=InfraredNote: See page 35 for Transcast registrationand operation information.1TypicalTV backCOMPONENT VIDEOY CR CB R LS-VIDEO 1 VIDEO 1 R-AUDIO L-/MONOVARIABLEAUDIO OUTPUTRLS-VIDEO 2 VIDEO 2 R-AUDIO L-/MONOPhone InTelephoneLineOutputJackTelephone2-LineSplitterTelephone2Variable Audio Output Hookup