Zenith DPDP40V Owner's Manual

Also see for P40V22: Owner's manual

Zenith DPDP40V Owner's Manual Manual pdf 42 page image

42Troubleshooting check listNo output from oneof the speakers• Adjust BALANCE in the USER CONTROL mode of theSOUND menu. (Refer to p.36)Strange soundfrom the Monitor• The reason strange sound comes from the Monitor when turn-ing the Monitor on or off is due to the signals being input oroutput to the Monitor.This strange noise does not mean that the Monitor is faulty.No picture &No sound• Check whether the Monitor is turned on.• Check the power cord.• Plug another product’s power cord into the wall outlet wherethe Monitor’s power cord was plugged in.No or Poor coloror Poor picture• Select COLOR in the USER CONTROL mode of the PIC-TURE menu and press the VOLUME (G) button.• Keep a certain distance between the Monitor and the VCR.• Activate any function to restore the brightness of the picture.(If still picture is on the screen for more than 5 minutes, thescreen gets dark.)The remote controldoesn’t work• Check to see if there is any object between the PlasmaDisplay and the remote control causing obstruction.• Check to see if the batteries are installed with the correctpolarities. (Refer to p.24)• Replace new batteries. (Refer to p.24)Picture OK &No sound • Press the VOLUME (G) button.

/ 43

Related manuals for Zenith P40V22