19First step Composition Connection Basic function Time setting Picture & Sound Special function OthersPC Setup- See your computer’s image on the Monitor.• Press POWER button on the PC and press ON/OFF buttonon the Monitor. After this press button on the Monitor orpress power on button on the remote control.• Press video/pc button on the remote control to selectRGB.• Set the resolution of PC under SXGA (1280x1024). (Referto page 20.)video/pcHow to connectHow to useMake the connections shown in the illustration below• Set the computer video output to UXGA; for the best picture quality. (If the video output of thePC is not compatible with the Monitor, no picture will appear on the Monitor. See page 20.)• As shown below, connect the video output port of the PC to the Monitor RGB-PCINPUT(VGA/SVGA/CGA/SXGA) RGB-DTV INPUT(480p/720p/1080i).• Connect the audio out from the PC to the Audio jacks on the Monitor. (Audio cables not includedwith the Monitor)• If available, adjust PC sound to your preference.(+) ( ) (+)( )AUDIO (MONO)R L VIDEO Y PB RPAV INPUTAUDIOR L R LEXTERNAL SPEAKER (8Ω) AC INPUTAUDIO INPUT S-VIDEOCOMPONENT (480i/480p/720p/1080i)RGB-PC INPUT(VGA/SVGA/XGA/SXGA)RGB-DTV INPUT(480p/720p/1080i)(DVD/DTV INPUT)(+) ( ) (+)( )AUDIO (MONO)R LAV INPUTCOMPONENT (480i/480p/720p/1080i)(DVD/DTV INPUT)RGB-PC INPUTRAUDIO INPUTS-VIDEOEXTERNAL SPEAKER(8Ω)R LAC INPUTLAUDIO(VGA/SVGA/XGA/SXGA)RGB-DTV INPUT(480p/720p/1080i)VIDEOYPBPRTips• To avoid burning an image on the Monitor screen, don’t have a still picture on the screenfor a long period time.< Back panel of the Monitor>
