Zenith H25F39DT Installation And Operating Manual, Warranty

P A G E 1 8 206-3683Set the ClockTIMERCH PREVIEWENTER1 2 34 5 67 8 90MENU ALARMADJ ADJSELECTAUTOEASTERNCENTRALMOUNTAINPACIFICCLOCK MENUCLOCK SETTIME ZONEDAY. SAVINGUSE SELECT TO CHOOSEUSE ADJ TO CHANGEAUTOAUTOOFFON10:43 AMCLOCK MENUCLOCK SETTIME SETMANUALTIMERAUTO PROGRAMADD/DEL/BLNKCH. LABELSCLOCK SETTIMERCAPTIONSLANGUAGESETUP MENUTO SET CLOCKAUTO PROGRAMADD/DEL/BLNKCH. LABELSCLOCK SETTIMERCAPTIONSLANGUAGESETUP MENUTO SET CLOCKUSE SELECT TO CHOOSEUSE ADJ TO CHANGE2433Mini glossaryTIME A four-digit figure broken down into hours and minutes, used to enter the current time when setting the clock or wake-up alarm.HOURS First two digits that are entered when setting the clock or the wake-up alarm.MINUTES The last two digits that are entered when setting the clock, or the wake-up alarm.TIMER Chooses AM or PM when setting the clock.Clock Auto/Manual Operating Modes SetupUse MENU, SELECT, and ADJ Left/Right to choose the Clock menu and toset up the clock menu options.Clock Mode Auto: TV automatically sets the time.Time Zone: User can choose the time zone or have theTV set it automatically.Day. Savings: User can choose to have daylightsavings adjust the clock time one hour, or have the TVadjust it automatically.Manual: User sets the time on the clock.Press ENTER repeatedly to remove menus.13The clock can also be set using 24 hour “military time.” For p.m. settingsadd 1200. For example, to set 6:30 p.m., add 1200 to 630, = enter 1830.For Auto Clock Set to work, TV must be tuned to a channel that has XDSdata available. Auto Clock Set, sets the time only once while the TV is on.To set the clock with XDS data, turn TV off, then back on again, or set theclock time manually.