Zenith HCS5650 Installation And Operating Manual

Also see for HCS5650: Specification sheet

Contents

P A G E 2 1MUTETurns sound Off and On, while the pictureremains.GUIDEUse to view DTV program information.CC(Closed Captioning)Press to access closed captions.ALARMUse to go to the Alarm menu. Set a timefor the TV to turn itself on.POWERTurns TV On or Off.BANKPress and repeat to select a ChannelMemory Bank - - 1, 2, 3, or 4 (Standby).SAPSelects MTS sound: Mono, Stereo, and SAPin analog mode. Change the audiolanguage in DTV mode.INFOPress to display current programinformation.[-] BUTTONWhen selecting a digital broadcastchannel, key in the Main channelnumber followed by the-> [-] -> then thesub channel number. Analog channels donot contain a sub channel number.TIMERPress repeatedly to select a preset time toautomatically shut the TV off.VOLUME / CHANNEL / OK (Enter)Increase or decrease sound level.Select available channels.Select on-screen menu items and changemenu values.NUMBER BUTTONSUse for direct channel entry.BED 1/BED 2 (*See Note Below)Determines the code set transmitted, Bed1 or Bed 2. Switch setting must correspondto item 27, HOSPITAL MODE setting in theTV’s Installer Menu.ADJ D E F GUser ADJ (adjust) Up/Down menu arrows,Left/Right to change the selected option.CHANNEL PREVIEWDisplays available TV channels, and (ifactive) the Guest Parental Control menu:set V-Chip blocks to restrict both analogand digital programming.• Aux Channel allows the guest to selectthe Audio / Video inputs. (Use the A/Vjacks on the back of the TV as a source). FLASHBK (Flashback)Use to return to the last channelviewed.Installer Remote Control Key FunctionsA brief list of the keys on the optional installer’s remote and what they do.*Note: Bed 1 - Bed 2 switch on patient remote. The position of the Bed 1 - Bed 2 switch must correspond to the setting in the Installer’smenu. The switch above can be set by sliding it to the Bed 1 or Bed 2 position. On the patient’s remote, the Bed 1 or Bed 2 position can beselected by using a paper clip or a ball-point pen to slide the switch to the correct position.Left position = Bed 1.Right Position = Bed 2.