Zenith IQB50M90W Operating Manual

Also see for IQB50M90W: Operating guide & warranty

Zenith IQB50M90W Operating Manual Manual pdf 31 page image

P A G E 3 1206-3486-O1234567Security TimerQuitTo ExitTo Menu BarMenuQuitTo ExitTo Menu BarMenuS M T W T F S S M T W T F S1 2 3 4- - : - - AM TV ON- - : - - AM TV OFF- - CHANNELONCEDAILYWEEKLYOFFSecurity TimerChannel LabelsSource I DFavorite ChannelsParental ControlSecurity TimerCaption/TextBackgroundVideoSetup Special Audio Theater CalendrVideoSetup Special Audio Theater Calendrprg powertv vcr cable helpsourcedisplayflashbk mutechannelchannelvolume volume1 2 34 5 6708 9rewind f. fwd.recordpipswapfreezmovetv/vcrpause timerplaystopmenu quitfavchpip ch c.skip13/4/72/4/6/7Press MENU and the RIGHT/LEFT arrowbutton to access the Special Menu.Press an UP/DOWN arrow to select SecurityTimer. Press the RIGHT arrow button toactivate Security Timer option.You may select up to four ON/OFF timesettings for your TV (Maximum timebetween ON timer and OFF timer is 3hours). Use the RIGHT arrow button toselect 1-4, then press the DOWN arrowbutton to select the TV on time.Use the DOWN arrow button to set the hourand use the LEFT/RIGHT buttons to selectminute and AM or PM.Press the LEFT arrow button until the cursorappears to the left of the current line item.Use the DOWN arrow button to selectChannel. Set the channel for the TV to tuneto by entering the channel through thenumber keypad.Use the UP/DOWN arrow buttons to selectOnce, Daily, Weekly or Off. Use the RIGHTarrow button to set your selection.5NOTE: The OFF Timer will only activate if the TV wasturned on or tuned with the ON timer and no channelselection was made after this time. If you change thechannel after the ON Timer has been activated, the OFFTimer will deactivate.If no remote control button is pressed after ON timer isactivated, and no OFF timer is set, then the TV willautomatically turn off after 3 hours.