Zenith IQD61W20 Operating Manual
Also see for IQD61W20: Operating guide
                                                                        | |
Contents
| 
P A G E 1 4 206-3674InOutAudioL RVideo3 4VCRBack AV panelA/V cablesnot includedwith TVCable TVwall jackRound wire(75ohm)RF coaxial wire(75ohm)AntennaS-VideoORVIDEO 2INPUTVIDEO 1INPUTS-VIDEOINMONITOROUTANT/CABLE2INPUT ANT/CABLE1INPUTRLRLS-VIDEOOUTVIDEOVIDEOLOOP OUTMONO MONOCable boxInOut1234VCR+CABLE BOXLocate the Antenna/Cable 2 jack onthe back of your TV. Connect the cablethat runs from the wall or antenna tothe jack.Now find the Loop Out jack.Connect the cable from this jack tothe Input jack on the back of yourcable box.Locate the Output jack on the back ofyour cable box. Connect this to the RFor VHF/UHF/CATV In jack on the backof your VCR.If you want to connect VCR with TVdirectly, Connect the cable from theLoop Out jack to the RF orVHF/UHF/CATV In jack on the back ofyor VCR.Find the composite video andaudio jacks on the back of yourVCR, and connect them followingthe instructions provided withyour equipment.You may connect either the com-posite video or the S-Video cablesto your Entertainment Machine.(Do not connect BOTH the com-posite and the S- Video cables. Inthe event that you connect bothcomposite and the S-Video cables,only the S-Video will work.)To hear stereo sound from cable or your VCR,you will need to connect A/V cables as well asthe wire that runs from the VCR to yourEntertainment Machine.If you want to receive your signals on Channel3 or 4, locate the Out to TV jack on your VCR.Connect a cable from the Out to TV jack to theAntenna/Cable 1 jack on the back of yourEntertainment Machine. |
Related manuals for Zenith IQD61W20
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine