![Zenith P42W46X Installation And Operating Manual Manual pdf 35 page image](https://manuals-archive2.s3.amazonaws.com/4798083/4fa79bf647a16dc58a9a2a92575182f835f.jpg)
Owner’s Manual 35External Control Device Setup02. Input Select (Command2:b) (Main Picture Input)G To select input source for the TV.You can also select an input source using the TV/VIDEObutton on the TV's remote control.TransmissionData 0 : TV1 : Video 12 : Video 23 : Component 14 : Component 25 : RGB6 : DVI[k][b][ ][Set ID][ ][Data][Cr]Acknowledgement[b][ ][Set ID][ ][OK][Data][x]01. Power (Command2:a)G To control Power On/Off of the TV.TransmissionData 0 : Power Off 1 : Power On[k][a][ ][Set ID][ ][Data][Cr]Acknowledgement[a][ ][Set ID][ ][OK][Data][x]* In a like manner, if other functions transmit ‘FF’ databased on this format, Acknowledgement data feedbackpresents status about each function.* Real data mapping 10 : Step 0A : Step 10 (SET ID 10)F : Step 15 (SET ID 15)10 : Step 16 (SET ID 16)63 : Step 99 (SET ID 99)64 : Step 10005. Volume Mute (Command2:e)G To control volume mute on/off.You can also adjust mute using the MUTE button onremote control.TransmissionData 0 : Volume mute on (Volume off)1 : Volume mute off (Volume on)[k][e][ ][Set ID][ ][Data][Cr]Acknowledgement[e][ ][Set ID][ ][OK][Data][x]03. Aspect Ratio (Command2:c) (Main picture format)G To adjust the screen format.You can also adjust the screen format using the ARC(Aspect Ratio Control) button on remote control or in theScreen menu.TransmissionData 0 : Normal screen (4:3)1 : Wide screen (16:9)2 : Horizon3 : Zoom[k][c][ ][Set ID][ ][Data][Cr]Acknowledgement[c][ ][Set ID][ ][OK][Data][x]04. Screen Mute (Command2:d)G To select screen mute on/off.TransmissionData 0 : Screen mute off (Picture on)1 : Screen mute on (Picture off)[k][d][ ][Set ID][ ][Data][Cr]Acknowledgement[d][ ][Set ID][ ][OK][Data][x]06. Volume Control (Command2:f)G To adjust volume.You can also adjust volume with the volume buttonson remote control.TransmissionData Min : 0 ~ Max : 64• Refer to ‘Real data mapping 1’ as shown below.[k][f][ ][Set ID][ ][Data][Cr]Acknowledgement[f][ ][Set ID][ ][OK][Data][x]07. Contrast (Command2:g)G To adjust screen contrast.You can also adjust contrast in the Picture menu.TransmissionData Min : 0 ~ Max : 64• Refer to ‘Real data mapping 1’ as shown below.[k][g][ ][Set ID][ ][Data][Cr]Acknowledgement[g][ ][Set ID][ ][OK][Data][x]08. Brightness (Command2:h)G To adjust screen brightness.You can also adjust brightness in the Picture menu.TransmissionData Min : 0 ~ Max : 64• Refer to ‘Real data mapping 1’ as shown below.[k][h][ ][Set ID][ ][Data][Cr]Acknowledgement[h][ ][Set ID][ ][OK][Data][x]