Zenith P50W28A Installation And Operating Manual

Also see for P50W28A Series: Installation and operating guide Service manual Service manual

Zenith P50W28A Installation And Operating Manual Manual pdf 17 page image

17Time Menu Options- Timer function operates only if the clock has been set.- Off-Timer function overrides On-Timer function if they are set to the same time.- The monitor must be in standby mode for the On Timer to work.- To cancel ON/OFF TIMER functionUse the D / E button to select OFF in step 3.a. To check the remaining sleep time, press the SLEEP or OK button once.b. To cancel sleep time setting, press the SLEEP button repeatedly to select --- MIN.c. If you turn the monitor off after setting the sleep timer, the setting is erased.Setting the On/OfSetting the On/Offf TTimerimerSleepSleep TTimerimer1. Press the MENU button and then use D / E button to select the TIME menu.2. Press the G button and then use D / E button to select OFF TIMER/ON TIMER.3. Press the G button and then use D / E button to select ON.4. Press the G button and then use D / E button to set the hour.5. Press the G button and then use D / E button to set the minutes.6. For ON TIMER function only; press the G button and then use D / E button to setvolume level.7. Press the MENU button.- Sleep timer turns the Monitor off at the preset time.- Use the SLEEP button to select the number of minutes. The display --- MIN will appear on the screen, fol-lowed by 10, 20, 30, 60, 90, 120, 180, and 240. The timer begins to count down from the number of minutes selected.- When the sleep time you want is displayed on the screen, press the OK button.Auto OfAuto Offf- If there is no input signal, the Monitor turns off automatically after 10 minutes.1. Press the MENU button and then use D / E button to select the TIME menu.2. Press the G button and then use D / E button to select AUTO OFF.3. Press the G button and then use D / E button to select ON or OFF.4. Press the MENU button.12 0030VIDEOAUDIOTIMESCREENTWINSPECIALCLOCKOFF TIMERON TIMER GAUTO OFFOFFONVOLMENU PREV.zzzzVIDEOAUDIOTIMESCREENTWINSPECIALCLOCKOFF TIMERON TIMERAUTO OFF G OFFONMENU PREV.Setting the ClockSetting the Clock- If current time setting is erased by a power failure, if TV is unplugged, or if the monitor has been turnedoff with the ON/OFF button on the monitor, reset the clock.1. Press the MENU button and then use D / E button to select the TIME menu.2. Press the G button and then use D / E button to select CLOCK.3. Press the G button and then use D / E button to set the hour.4. Press the G button and then use D / E button to set the minutes.5. Press the MENU button.VIDEOAUDIOTIMESCREENTWINSPECIALCLOCK GOFF TIMERON TIMERAUTO OFFMENU PREV.