Zenith SENTRY 2 SLS1931S Operating Manual & Warranty

Contents

ON-SCREEN MENUSBASIC MENU OPERATIONSVertical Control Panel Shown(Menu buttons are providedon some remote controls.)1. To See a Menu or Change MenusPress MENU repeatedly until the desired menu isshown. Example shows choosing the SETUP Menu.-- > AUTO CH. SEARCHCH, ADD/DELTUNING BANDAUTO FINE TUNECLOCK SETCAFrIONSJChoosing Setup Menu2. To Select an Option/Feature on a MenuPress SELECT (SEL) repeatedly until the desiredoption/feature is highlighted. Example showsselecting CLOCK SET.AUTO CH. SEARCHCH. ADD/DELTUNING BANDAUTO FINE TUNE- > CLOCKSETCAPTIONSJSelecting Clock Seto To Access an Option/Feature for AdjustmentPress ADJUST (ADJ) Left/Right to access theselected option/feature to see its submenu or statusdisplay. Follow the instructions shown in the dis-play. In :most cases, you simply press ADJUST(ADJ) Left/Right a second time to adjust the ac-cessed option/feature. You still see the status of theitem change in the display.NOTE: :Do not change channels during menuoperations unless instructed to do so in the proce-dures given in this operating guide.f -,--,CI_3CK SETJPRESS NUMBERSOR ADJUST KEYSClock Set Display4. To Access a Different !Vlain MenuPress MENU repeatedly until the desired menu isshown.5. To Return to Normal ViewingPress ENTER (ENT) or wait a few seconds and theTV will return automatically to normal operation.Service Menus: In addition to the menus shown above,there are menus for factory attd field servichag. Servicemenus are not intended for use by the ownez.If you inadvertently access a service menu, press ENTER(ENT) to return immediately to normal TV viewing.2s_A 8 -- 2