Zenith Sentry 2 Operating Manual & Warranty

Also see for Sentry 2 Series: Operation guide & warranty Operating guide & warranty Operating guide & warranty Operating guide & warranty Operating guide & warranty

SETUP MENUSETUPMENU SETUP MENU• , AUTO CH. SEARCHCH. ADD/DELCH. LABELS *1UNING BANDAUTO RNE 1UNECLOCK SETCANONSCH. BACKGROUNDSTARTSETUP Menu* Some models -)CLOCK SETCAPIIONSCH. BACKGROUNDSETUP Menu While AUX Channel is Being Used(To get SETUP Menu on left, select a regular channel)AUTO CH. (Channel) SEARCHPurposeFinds all available channels and stores them in memory foraccess by CHANNEL (CH) Up/Down.Use AUTO CH. SEARCH only when you first install yourTV, or when you permanently change the connections tothe TV. For example, when you replace the antenna with acable-TV system.Programmed channels are stored in protected memory, andare not affected by a power outage.Before Using AUTO CH. SEARCHConnect and turn ON all external equipment, such as cableTV decoder, VCR, etc.NOTE: AUTO CH. SEARCH is not displayed while AUXchannel is being used.To Use AUTO SEARCH1. AUTO CH. SEARCH should be selected if youfollowed the "Basic Menu Operation" given in the"On-Screen Menus" section.2. Press ADJUST (ADJ) Left/Right to start theAUTO CH. SEARCH, the status of the search isshown in the display. When the search is complete,you can watch the TV program of ,our choice.When Some Channels Are Not FoundAUTO CH. SEARCH finds only active channels and storesthem in the favorite channel memory. You can a_ld channels tothose stored in memory by using the CH. ADD/DEL option.If you have difficulty tuning some channels, you may have tomanually change the TUNING BAND and AUTO FINETUNE. Refer to respective option for details.When Only AUX Channel Is FoundYou may have used AUTO CH. SEARCH without having asignal source (antenna, cable-TV, etc...) connected to the TV.In which case, no channels are stored in the favorite channelmemory, and the TV operates only on the AUX channel.To resolve this condition, connect a signal source, turn signalsource ON, if needed, and use AUTO CH. SEARCH again.NOTE: AUX (Auxiliary) channel is operational only onTVs having separate video and audio inputs for VCR opera-tions.SETUP MENUe,AUTO CH. SEARCHCH. ADD/DELTUNING BANDAUTO FINE TUNECLOCK SETCAPI1ONSCH. BACKGROUNDSTARTDETERMINING TUNING BANDDeterminingTuning Band=-eSelecting Auto Ch. SearchTUNING BAND IS r--=-===-iCH [=='=1 IS FOUNDWhile Searching forActive ChannelsALrrO CI-I.SF_.ARCHHAS COMP2TUNING BAND IS [-'----'--1"-]CHANNELS FOUNDWhen Search isCompleteCH 2STEREOJWhen Returning toChannel/Audio Display_o 8 -- 1