Zenoah KOMAT'SU HB2302 Owner's Manual

Also see for HB2302: Workshop manual Kit manual Owner's manual Owner's/operator's manual Owner's manual

Contents

Zenoah KOMAT'SU HB2302 Owner's Manual Manual pdf 14 page image

GB-14HB2302 / HBZ26012. Align the (5) indicated on the vacuum pipe (4)with the indicated on the blower. Then insert thevacuum pipe (4) into the blower.3. Turn the vacuum pipe (4) until the (5) is alignedwith the indicated on the blower to lock the vacuumpipe.WARNING• Hold the bottom of the vacuum pipe when turning thevacuum pipe to install or remove it.4) Installing Elbow and Dust Bag1. Open the fastener of the dust bag.2. Insert the elbow convex groove into the dust bag el-bow opening.Continue to push the elbow convex groove until theconvex hits against the dust bag opening.Close the dust bag fastener.(8)Groove(6)Convex Groove(7)Convex EndAttach the adequate accessories, respectivelyfor blower operation and dust-collecting op-eration.NOTE• Use the gloves during operation.• In adjustment of the blower/dust collector or in othertypes of operation, be sure to stop the engine anddetach the spark plug cap.• Never start operation unless this machine is com-pletely assembled.MOUNTING THE DUST-COLLECTING KIT1) Installing Support Handle• This handle is supplied with the blower.• Fit the holes of volute and handle, tighten the screws.• Be sure to tighten the screws straightly.2)1. Fit the extension pipe (1) groove with main unit portprojection, turn to mount the pipe to the main unit.2. Tighten the clamp screw (2) securely.3) Installing Vacuum Pipe (nozzle)1. Loosen the screw (3), and open the suction port cover.(1) Support Handle(2) Holes(3) Screws11. Optional vacuum kit usage

/ 16

Related manuals for Zenoah HB2302