Zephyr ALA-M90BBX Installation And Use Instructions And Warnings

Also see for ADU-M90BSX: Installation and use instruction

Contents

install the hood

Zephyr ALA-M90BBX Installation And Use Instructions And Warnings Manual pdf 9 page image

- 22 -INSTALL THE HOODRemove the plastic protective film from allexterior surfaces, duct covers and filters, priorto final installation1. Construct wood wall framing that is flush withinterior surface of wall studs (Fig.22/23).Make sure:a) the framing is centered over installationlocation.b) the height of the framing will allow the hood tobe secured to the framing within thedimensions shown.2. Determine desired height over cook topand mark hood bottom line. Install drywallanchors and 4,8x38mm screws perdimensions shown in Fig. 22/23.3. Hang the hood onto the screws.4. Tighten mounting screws. Add additionalscrews through hood body as needed foradditional support.Notes:a. Minimum hood distance above cook topmust not be less than 24”. A maximum of36” above cook top is highlyrecommended for best capture of cookingimpurities. Distances over 36” are at theinstaller and the users discretion; and ifceiling height and flue lenght permit.FRAMING BEHIND WOODCROSS SUPPORTWOOD CROSSSUPPORT BEHINDDRYWALL DRYWALL8-1/4”16-7/16” FROMBOTTOM OF HOODHOODBOTTOMFIG.22FRAMING BEHIND WOODCROSS SUPPORTWOOD CROSSSUPPORT BEHINDDRYWALL DRYWALLFIG.23Model Layers8-1/4”15-11/16” FROMBOTTOM OF HOODHOODBOTTOMModel Duo