Zephyr ALL-E42ABX Installation Instructions Manual

Contents

read and save these instructions

Zephyr ALL-E42ABX Installation Instructions Manual Manual pdf 4 page image

www.zephyronline.comIMPORTANT SAFETY INSTRUCTIONSFOR RESIDENTIAL USE ONLYREAD AND SAVE THESE INSTRUCTIONSPLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.IMPORTANT: Save these Instructions for the Local Electrical Inspectors use.INSTALLER: Please leave these Instructions with this unit for the owner.OWNER: Please retain these instructions for future reference.Take care when using cleaning agents or detergents.Suitable for use in household cooking areaWARNING - To reduce the risk of fire or electric shock, do not use this fanwith any Solid-State Speed Control Device.CAUTION - To reduce risk of fire and to properly exhaust air, be sure to ductair outside – Do not vent exhaust air into spaces within walls or ceilings or intoattics, crawl spaces, or garages.CAUTION - For general ventilating use only. Do not use to exhaust hazardousor explosive materials and vapors.CAUTION - To avoid motor bearing damage and noisy and/or unbalancedimpellers, keep drywall spray, construction dust, etc. off power unit.CAUTION - Please read specification label on product for further informationand requirements.WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TOPERSONS, OBSERVE THE FOLLOWING:A. Use this unit only in the manner intended by the manufacturer. If you haveques tions, contact the manufacturer.B. Before servicing or cleaning unit, switch power off at service panel and lockthe service disconnecting means to prevent power from being switched on ac-cidentally. When the service disconnecting means cannot be locked, securelyfasten a prominent warning device, such as a tag, to the service panel.WARNING - TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:A. Never leave surface units unattended at high settings. Boilovers cause smo-king and greasy spillovers that may ignite. Heat oils slowly on low or mediumSafety instructions- 4 -