Zephyr ALL-M90BBX Installation And Use Instructions Manual

Also see for ADL-E42BSX: Installation and use instructions

Contents

install the hood

Zephyr ALL-M90BBX Installation And Use Instructions Manual Manual pdf 9 page image

- 23 -FIG.21MOUNTINGSCREWS3,9x6 mmINSTALL THE HOODInsert 8 screws (3.9x6mm), located in theHardware Package (Fig. 21).DUCTED INSTALLATION ONLYNote: Rooms with 10 to 12 foot ceilingrequire duct cover extension/supportframe model Z1C-02LL, available fromyour local dealer.Discard the duct covere extension/support frame supplied with the rangehood and replace it with the longer ductcover extension.1. Run 6-inch diameter metal ductwork tothe outside location (Fig.22).2. Install an appropriate wall or roof capwith damper to exhaust the air to theoutside.3. Tape all duct joints with aluminum ducttape.NON-DUCTED INSTALLATION ONLYNote:a. Purchase Model ZRC-01LL Non-ducted Recirculating Kit from yourlocal dealer.b. Rooms with 10 to 12 foot ceilingrequire duct cover extension/supportframe model Z1C-02LL, availablefrom your local dealer.Discard the duct cover extension/support frame supplied with therange hood and replace it with thelonger duct cover extension.1. Install the plenum to the frame using(4) 3.9 x 6 mm screws provided asshown (Fig.23).2. Install the 6” duct connector.3. Attach 6-inch expandable ducting to theplenum and tape joint with aluminumduct tape.FIG.226-INCH DIA.METAL DUCTFIG.23PLENUMMOUNTING SCREWS(3.9 x 6mm Flat Head)6” DUCTCONNECTOR

/ 12

Related manuals for Zephyr ADL-E42BSX