Zephyr Okeanito COK-E36BSX Use, Care And Installation Manual

Also see for Okeanito COK-E36BSX: Use, care and installation guide

Contents

Zephyr Okeanito COK-E36BSX Use, Care And Installation Manual Manual pdf 13 page image

11Installation – Remote Blower Preparation3. Install threaded cable lock and remote blowerwiring harness through the remote blowerwiring knockout. Attach by (4) M4*8 screws.5. Connect 6 pin male connector from remoteblower wiring to 6 pin female connector oncontrol board box.REMOTE BLOWER PREPARATION1. Remove internal blower flange plate. 2. Install remote blower 8” round collar. Attach by(4) M4*8 screws.NOTE: For instructions on mounting the remoteblower please refer to the CBE-1000 or PBN-1000A remote blower manual included in theremote blower packaging or on our website atwww.zephyronline.com4. Secure ground wire from remote blower wiringto ground wire rivet nut.