Zephyr ZPA-M90S Use, Care And Installation Manual

Also see for Venezia ZVE-E30S: Use, care and installation guide

Contents

Zephyr ZPA-M90S Use, Care And Installation Manual Manual pdf 9 page image

FEATURES & CONTROLS 7CONTROLS: FILTER CHANGE INDICATOR (Carbon Filters)Filter Change Reminder (Carbon, if fitted):When your hood is installed as a 'Purifying' (Ductless Recirculating) unit, it is fitted witha set of Carbon Filters to purify exhaust and fumes from cooking, and re-circulates the airwithin the home. These Carbon Filters are required to be replaced after every 120 hoursof use. The Filter Change Reminder function in the microprocessor needs to beswitched on. The microprocessor in the controls when set, will elapsed and countusage time and indicate by a flashing when carbon filter replacement is neededevery 120 hrs.Setting the Filter Change Reminder:When Off, hold for approx. 5 seconds.The display will change from(exhaust mode) to , (purifying mode/carbon filters used) this indicates that theelapse timer function is switched on andCarbon Filters are used.Filter Replace Indicator:When the display starts flashing, theCarbon Filters requires replacement after120 hours of use.Re-setting Function:Once filters are replaced, with hood off,press and hold , the display will appear;hold for approximately 5 seconds untilon display disappears . The FilterChange Reminder is now re-set and a new120 hours elapse cycle is initiated.hold 5 secs.hold 5 secs.display from <--> to display from to < >display flashesSet ModeChange FiltersTo Reset