Zephyr ZPY-E30 (B,W,S) Use, Care And Installation Manual

Also see for Pyramid ZPY-E30B: Use, care and installation guide

Contents

Zephyr ZPY-E30 (B,W,S) Use, Care And Installation Manual Manual pdf 1 page image

USE, CARE, AND INSTALLATION GUIDERead all Instructions before Installing and operating this applianceMODELS: ZPY-E30 (B,W,S), ZPY-E36 (B,W,S) PyramidWARNINGInstallationThe installation in this manual is intended for qualified installers, service technicians or personswith similar qualified background. DO NOT attempt to install this appliance yourself. Injury couldresult from installing the unit due to lack of appropriate electrical and technical background.All electrical wiring must be properly installed, insulated and grounded. Overly accumulatedgrease in old duct work should be cleaned out or duct work should be replaced if necessary toavoid the possibility of a grease fire. Check all joints on duct work to insure proper connectionand all joints should be properly taped.OperationsRead all instructions in this manual before operating the appliance. Save these instructions forfuture reference.Always leave safety grills and filters in place. Without these components, operating blowerscould catch on to hair, fingers and loose clothing.NEVER dispose cigarette ashes, ignitable substances, or any foreign objects into blowers.NEVER leave cooking unattended. When frying, oil in the pan can easily overheat and catch fire.The risk of self combustion is higher when the oil has been used several times.CleaningThe saturation of greasy residue in the blower and filters may cause increased inflammability.Keep unit clean and free of grease and residue build-up at all times to prevent possible fires.Filters must be cleaned periodically and free from accumulation of cooking residue (see clean-ing instructions inside). Old and worn filters must be replaced immediately. Do not operatedblowers when filters are removed. Never disassemble parts to clean without proper instructions.Disassembly is recommended to be performed by qualified personnel only. Call our service cen-ter for removal instructions.The manufacturer declines all responsibility in the event of failure to observe the instruc-tions given here for installation, maintenance and suitable use of the product. The manufac-turer further declines all responsibility for injury due to negligence and the warranty of theunit automatically expires due to improper maintenance.IMPORTANT SAFETY NOTICE* Please check for latest specification revisions before any custom work or cutouts.