Zephyr ZPY-E30 (B,W,S) Use, Care And Installation Manual

Also see for Pyramid ZPY-E30B: Use, care and installation guide

Contents

Zephyr ZPY-E30 (B,W,S) Use, Care And Installation Manual Manual pdf 11 page image

MAINTENANCE 9CLEANINGSurface Maintenance:Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasivedetergent (e.g. comet powder scrub, EZ-Off oven cleaner), or steel wool/scoring pads which willscratch and damage surface.For heavier soil use liquid degreaser such as 'Formula 409' or 'Fantastic' brand cleaner.After cleaning, you may use non abrasive stainless steel polish/ cleaners such as 3M orZEP, to polish and buff out the stainless luster and grain. Always scrub lightly, withclean cotton cloth, and with the grain.Metal FiltersThe Metal Filters fitted by the factory areintended to filter out residue and greasefrom cooking. It need not be replaced on aregular basis but are required to be kept clean.Filters should be cleaned after every 30hours of use.Remove and clean by hand or indishwasher. Spray 'Formula 409' orequivalent degreasing detergent and leaveto soak if heavily soiled.Dry filters and re-install before using hood.Replacing Metal FiltersShould filters wear out due to age andprolonged use, replace with following partnumber:Also replace damaged filter that haspunctured or broken mesh, bent or broken frame.Hood Model: Part No. Filters in pkg.ZPY-E30 (B, W, S) ZOF-MO32 2ZPY-E36 (B, W, S) ZOF-MO33 3

/ 14

Related manuals for Zephyr Pyramid ZPY-E30B