Zero88 Jester Operating Manual
Also see for Jester: Operating manual
                                                                 | |
Contents | 
Preset Mode JesterML Operating Manual73-406-00 Issue 1.0 7 of 65Two Preset OperationIn two preset operation the PRESET A and PRESET B faders, the A MASTER and BMASTER and the GRAND MASTER are used to control the output levels from thedesk. The fade time set with the middle wheel when SPECIAL is selected, is used todetermine the crossfade time between the preset masters.Setting up for Two Preset Operation1. If the desk is not already in PRESET Mode, press and hold the MODE button for1 second. The PRESET LED next to the MODE button will come on.2. Ensure the bottom bank of faders are set to 1-12(24) mode and the fade time(press SPECIAL and use the middle wheel) is set to Manual.To Output a Scene from Preset A1. Set the required levels for each channel on the PRESET A faders.2. Set the A MASTER to full. The scene set up on PRESET A is output live.To Output a Scene from Preset B1. Check that the B MASTER is set to 0.2. Set the required levels for each channel on the PRESET B faders. This action isperformed without the output levels of the desk changing.3. Set the B MASTER to full. The scene set up on PRESET B is output live, mixedwith the scene on PRESET A.4. To remove the scene on PRESET A, bring the A MASTER to zero.Manual Fading between Scenes1. Ensure that the fade time (press SPECIAL and use the middle wheel) is set toSnap.2. Set up a scene using the PRESET A faders.3. Set the A MASTER to full, and the B MASTER to zero. The scene set on thePRESET A faders will be output.4. Set up a different scene on the PRESET B faders. This is done blind, without theoutput levels changing.5. To crossfade to the new scene set up on PRESET B, simultaneously move the AMASTER to zero and the B MASTER to full. You have direct control over thespeed of the crossfade. As the master faders are moved in tandem the scenesetup on PRESET B will fade in and the scene set on PRESET A will fade out.This crossfade is dipless.6. A new scene can then be set up on PRESET A without affecting the outputs.7. To crossfade to the new scene on PRESET A, simultaneously move the AMASTER to full and the B MASTER to zero.8. As the A and B master faders are moved in tandem the scene set up on PRESETB will fade out and the new scene set on PRESET A will fade in. The crossfade isdipless. |
Related manuals for Zero88 Jester
manualsdatabase
Your AI-powered manual search engine