25GB• Allen key (size 4) (21)• Allen key (size 6) (22)• 5 x cable ties (23)• Combined oil/petrol cylinder (18)• Front handle (Fig. 2)• 4 screws M5 x 35 (Fig. 2)• Cover (Fig. 2)• 4 nuts M5 (Fig. 2)4. Intended useThe power scythe (using the cutting blade) is designedfor cutting young trees, strong weedsand undergrowth.The power trimmer (using the line spool with cuttingline) is designed for cutting lawns, grassed areas andsmall weeds. The operating instructions as supplied bythe manufacturer must be obeyed to ensure that theequipment is used properly. Any use which is not ex-pressly permitted in the manual may result in damageto the equipment and place the user in serious danger.Be sure to observe the restrictions in the safety inst-ructions.Please note that our equipment has not been designedfor use in commercial, trade or industrial applications.Our warranty will be voided if the equipment is used incommercial, trade or industrial businesses or for equi-valent purposes.Important. Due to the high risk of bodily injury to theuser, the petrol power scythe must not be used to car-ry out the following work: to clean dirt and debris offwalkways, or to chop up tree or hedge clippings. Simi-larly, the petrol power scythe must not be used to levelout high areas such as molehills. For safety reasons,the petrol power scythe must not be used as a driveunit for other work tools or toolkits of any kind.The equipment is allowed to be used only for itsprescribed purpose. Any other use is deemed to be acase of misuse. The user/operator and not the manu-facturer will be liable for any damage or injuries of anykind resulting from such misuse.Non-permitted users:Persons who are not familiar with the operating manu-al, children, young people under the age of 16 as wellas persons under the influence of alcohol, drugs ormedication must not operate the unit.Working hours for gasoline brush cutterWhile it is permitted to use a brush cutter at any time,operators should always show due consideration toothers living nearby.5. Important informationSafety instructionsThis appliance is not intended for use by persons (in-cluding children) with reduced physical, sensory ormental capabilities, or lack of experience and know-ledge, unless they have been given supervision or in-struction concerning use of the appliance by a personresponsible for their safety.Children should be supervised to ensure that they donot play with the appliance.1. Training• Read the instructions carefully. Be familiar with thecontrols and the proper use of the appliance.• Never allow children or people unfamiliar with theseinstructions to use the appliance. Local regulationsmay restrict the age of the operator.• Never mow while people, especially children, or petsare nearby.• The operator or user is responsible for accidents ofhazards occurring to other people or their property.• Avoid running the engine indoors. The exhaust ga-ses contain harmful carbon monoxide.2. Preparation• While cutting, always wear substantial footwear andlong trousers.• Do not operate the appliance when barefoot or wea-ring open sandals.• Thoroughly inspect the area where the appliance isto be used and remove all stones, sticks, wires, bo-nes, and other foreign objects.• Before using, always visually inspect to see thatthe blades, blade bolts and cutter assembly are notworn or damaged. Replace worn or damaged bladesand bolts in sets to preserve balance.• On multi-bladed appliances, take care as rotatingone blade can cause other blades to rotate.3. Operation• Operate only in daylight or in good artificial light.• Avoid operating the appliance in wet grass, wherefeasible.• Always be sure of your footing on slopes.• Walk, never run.• Exercise extreme caution when changing directionon slopes.• Do not cutting excessively steep slopes.• Use extreme caution when reversing or pulling theappliance towards you.• Never operate the appliance with defective guardsor shields, or without safety devices.• Switch on the motor according to instructions andwith feet well away from the blade(s).• In this case, do not tilt it more than absolutely ne-cessary and lift only the part which is away from theoperator. Always ensure that both hands are in theoperating position before returning the appliance tothe ground.• Do not put hands or feet near or under rotatingparts.