Zhiyun CRANE-M2 User Manual

Also see for CRANE-M2: User guide Quick start guide

Contents

Zhiyun CRANE-M2 User Manual Manual pdf 8 page image

4Installation and BalancingMount the stabilizer on the tripod and unfold thetripod on a flat surface.Tripod InstallationCamera InstallationTake Sony DSC-RX100M5 as example:1. Take out the quick release plate, mount the camera on the plate and then tighten the1/4" screw at its bottom.2. Loosen the quick release plate thumb screw, slide the camera-mounted quickrelease plate to the quick release module. Push the quick release plate towards the tiltaxis motor but not to rub the motor. Tighten the quick release plate thumb screw afterthe safety lock is engaged.① Long slot of the quick release plate is for installingmirrorless camera, while the short slot is for compactcamera (Fuji mirrorless cameras can be installed inthe short slot).② Before mounting the camera, make sure thecamera is ready for work. Remove the lens cap andmake sure the camera’s battery and memory cardare already inserted.长槽短槽The pan axis motor has a latch to lock and unlock the pan axis. Please unlock the panaxis before using the stabilizer and lock it when not in use.For storage, fold the arms (axes) in order as shown in the picture below; Press downand stick roll axis to pan axis by the locking pin; Tighten the roll axis thumb screw tofinalize.Long Slot Short Slot