Zhiyun Crane-M User Manual

Also see for Crane-M: User guide

Contents

Zhiyun Crane-M User Manual Manual pdf 11 page image

32Balance AdjustmentLevel Adjustment on Pan Axis1514 zhiyun-tech.com zhiyun-tech.comLoosen Thumb Screw . Adjust the Pan Axis until the camera can stay still while keeping the Vertical3Arm level when turned to the right/left side. Complete balance adjustment by tightening up2Thumb Screw .3Start UpControl Panel IntroductionBatter y LevelIndicatorJoystickPower ON/OFFShifter LeverMode ButtonJoystick OperationJoystick controls the camera movement byturning the 3 axes up/down or left/right.Power ON/OFFPower on the stabilizer by pressing thePower button for about 3 sec.After the stabilizer is powered on, thePower button can be used for camerashooting control (only after the camerais connected to the stabilizer).Single press the button to take photos.Double press the button to start videorecording. Double press the buttonagain to stop recording.Shifter Lever OperationIn the event when a SONY camera isconnected: Push the Shifter Lever in Tdirection to zoom out, and in W directionto zoom in.In the event when a Panasonic camera isconnected: Move the Shifter Lever toeither direction for focusing.Mode ButtonSingle press or double press thebutton to switch between GimbalControl Modes.Long press the button for 1 sec. toactivate the standby mode, long pressthe button for 1 sec. again to wake up.Battery Level Indicator1.Shines YELLOW light when the stabilizer ispowered on/off:a)Quick flash for 3 sec. and shines solid for 1 sec.when powered on.b)Quick flash for 3 sec. when powered off.2.Shines BLUE light when the stabilizer is in normaloperation, the flashing frequency of the BLUE lightindicates the current battery level:a)Quick flash 4 times for battery level of 76%-100%.b)Quick flash 3 times for battery level of 51%-75%.c)Quick flash 2 times for battery level of 26%-50%.d)Quick flash 1 time for battery level of 1%-25%.2