SkyZhone 1604, 1404, 1204 Hardware Installation Guide 45DIAGNOSTICSThis chapter describes the SkyZhone access point’s LED light.Status and LEDThe SkyZhone contains one red LED located on the bottom right of the unit(Figure 20). The LED provides a quick verification as to whether it is operatingcorrectly or if it needs to be replaced.Figure 20: LED LocationThe following table describes the possible states of the LED light.Color Operation DescriptionRed On solid Power is on and the software is not in anoperational state. If the LED stays in this statefor more than one minute, the unit should bereplaced.Red One blink every5 secondsPower is on and the unit is operational.Off Off There is no power.