Zibro Kamin R 102 C Operation Manual

Contents

replacement of the wick

Zibro Kamin R 102 C Operation Manual Manual pdf 12 page image

REPLACEMENT OF THE WICKM ENSURE THAT THE HEATER IS OFF AND COMPLETELYCOOL BEFORE STARTING TO REPLACE THE WICK.Open the lid and remove the removable tank.Remove the batteries from the battery holder.Open the front grill. Remove the combustion chamberfrom the heater. Close the grill.Pull the knurled wick adjustment knob off the heater.Unscrew the three cabinet screws on the back and sidesof the heater. Pull the cabinet forward slightly, and thenremove it from the base plate.Unscrew the four wing nuts from the wick holder.Lift up the wick holder and the wick mechanism.Squeeze the wick to loosen the three wick pins andremove the wick from the wick holder. Ensure that youare wearing gloves and that you have a container inwhich to put the old wick.Put the wick holder back into position in such a waythat the holes in the wick holder are directly above theinner sides of the recesses in the burner. Ensure that theholes are facing down.Fold a new wick and place it in the wick holder. Pushthe three wick pins into the wick holder holes, and the-refore also into the recesses inside the burner. Push thewick with the wick holder up into the recesses as far aspossible. Push the pins firmly until you hear a clickingsound. Ensure that the wick holder does not bend!10987654321460223355aa 55bb771144991100aa8811 00bb66