REPLACEMENT OF THE WICKL ENSURE THAT THE HEATER IS OFF AND COMPLETELYCOOL BEFORE STARTING TO REPLACE THE WICK.Open the lid and remove the removable tank.Remove the batteries from the battery holder.Open the front grill. Remove the combustion chamberfrom the heater. Close the grill.Pull the knurled wick adjustment knob off the heater.Unscrew the three cabinet screws on the back and sidesof the heater. Pull the cabinet forward slightly, and thenremove it from the base plate.Unscrew the four wing nuts from the wick holder.Lift up the wick holder and the wick mechanism.Remove the screw on the stem holding the bracket andremove the bracket.Turn right the stem to the end and remove the wicksleeve (with wick).Turn the wick sleeve counterclockwise and lift the wicksleeve up. Remove it from the primary air tube.Squeeze the wick to loosen the three wick pins andremove the wick from the wick sleeve. Ensure that youare wearing gloves and that you have a container inwhich to put the old wick.1110987654321448235a 5b714968b8a1011