Matrix Switching System User Manual237.0.2.6 Options FunctionActivation Function:In the main configuration menu, select Options to pop up the Options Window asshown in Figure 7-6 aFigure 7-6 a Figure 7-6 bFunction Description:Linking Methods: In “Port number” select either COM1 port or COM2 port as shownin Figure 7-6 b ; in “Baud rate” select 9600 for signal transmission as shown in Figure7-6 a7.0.2.7 Other ApplicationDisplays the presently saved switching status as shown in Figure 6-7 below:Figure 7-7When input corresponding to Output is enabling, it shows the Output portscorresponding to the Input ports; when they are disable it will show red “None” in therelative field.7.0.2.8 Communication Protocol/Control Command CodeCommunication Protocol: Baud rate 9600bps, no odd or even calibration bit address,8bit transmission address, 1bit stop address. Please refer to the “Command list.pdf” inthe CD-ROM for more relative Command Code information.