8 of 28IP-LOGIC AV over IP Technical ManualTM-003-0001-100-00 | July 15, 2019© 2019 Zigen Corporationwww.zigencorp.comZIG-IPPro-RX decode network packet streams over the 10G IP Network and convert the signalsup to live HDMI 2.0. A single 10G copper RJ-45 connector or optical connector (10G SFP+ Modulessold separately) are used to receive the network packets. The HDCP 1.4/2.2 supported HDMIoutput is connected to displays such as TVs, projectors, monitors, and HDMI Audio Processors.ZIG-IPPro-RX can upscale or downscale an incoming stream. Frame rate conversion and color-space conversion is also supported to optimize the HDMI video to the recommended videoformat of the display.Audio Return Channel (ARC) and Optical Audio TOSLINK are included for streaming over IPNetwork. These streamed audio channels will be received by selected ZIG-IPPro-TX to be playedout on its respective analog audio connectors.Features of IP-Logic SeriesFeatures ZIG-IPPRO-TX/RXHDMI 2.0 ✓HDCP 1.4/2.2/2.3 ✓Maximum resolution 4K UHD/DCIMaximum 4K Framerate 60fps 4:4:4Video Compression SDVoE (1.4:1 artifact-free when exceeding 10G)Audio Compression SDVoE (Lossless)Audio Network Transport AES67 and ST2110-30/31Audio Discovery and Registration Dante/SAP, RAVENNA, Ethernet AVBScaling ✓Single-Frame Switching ✓Video Wall ✓Bezel Correction ✓Multiview ✓Color-Space-Conversion ✓Chroma Sub-Sampling ✓Frame-Rate Conversion ✓Multichannel Audio Downmixing ✓Latency < 120ms (Genlock mode)Unbalanced Analog Audio Output TXAudio Delay ✓Auto Discovery (IP) ✓Auto IP ✓Dolby Vision, HDR10+, HDR10, HLG ✓Preview Thumbnail streams ✓CEC ✓ARC ✓EDID Management ✓Overview