Zip 303061 Installation And Operating Instructions Manual

Contents

Zip 303061 Installation And Operating Instructions Manual Manual pdf 8 page image

Page 8 of 24 804546 03.17 1.00Installation ProceduresStep 7 – Commissioning - Filter FlushRemove the plug on the left side of the unit andcheck that the filter flush valve is in the correctposition to perform a filter flush, as shown in fig.1.Use a flat blade screw driver or 8mm allen key androtate the filter flush valve 180° either way to the“FILTER FLUSH“ position as shown in fig.2.Turn the mains water on and check for water leaks.Open the dispense tap outlet (note it may have thesafety lock feature enabled). Push the red safety lockbutton on the right hand side of the unit while pullingthe tap lever backwards to latch it open (see fig.2 andnext section for operating procedure).Turn the power on (the element will not be turned onat this stage, there is no need to have water coveringthe element yet).Touch the blue “Commission” button to commence.Touch “Yes” for the internal filter installation option.It is important for the valve to be in the “Filter Flush”position to prevent water entering the boiling tank.Touch [Next].Red safetybuttonFILTER FLUSHFILTEREDFig.2Depress orpull theleverFig.1Remove plug