Zip CH101 Installation And Operating Instructions Manual

Contents

Zip CH101 Installation And Operating Instructions Manual Manual pdf 3 page image

Page 3 of 12 81585UK Zip Chillmaster - Installation & operating instructions - Mar 2016 v1.05Safety informationPlease read all installation requirements, installation procedures and precautions beforeinstalling a Zip Chillmaster.Never attempt to install a Zip Chillmaster without reading all of the applicable instructions.Installation, commissioning and maintenance of this appliance must only be carried out by acompetent installer who will then be responsible for adhering to all relevant standards andregulations.Appliance to be wired to a double pole switched fused spur with a minimum breakingcapacity of 13 amps.Installation must comply with current IEE regulations and any Local Authority requirements.This appliance must be earthed.Check that the power supply is switched off prior to electrical connection.The appliance, its wiring and piping must not be modified in any way.In case of malfunction isolate the power supply immediately. In case of leaks also isolate thewater supply. Repairs must only be carried out by Zip Water UK or an authorised Zip serviceengineer.If the power supply cable is damaged it must be replaced by a Zip service engineer or aqualified electrician.The cross sectional area of the power supply cable must be appropriate for thepower rating and location of the appliance.The power supply cable must be adequately secured.Check that the power supply is switched off prior to electrical connection.Do not remove the appliance cover under any circumstances without first isolating theappliance from the power supply.This appliance must not be used by any person (including children) with limitedphysical, sensorial or mental abilities or failing experience and / or knowledge unless theyare supervised by a person responsible for their safety or received instructions about how touse the appliance.Children should be supervised in order to make sure that they do not play with the appliance.The appliance must only be used when correctly installed and in perfect working order.This product is approved to the LVD and EMC directives and CE endorsed.This product has been examined, tested and found when correctly fitted to complywith the requirements of the United Kingdom Water Regulations / Byelaws (Scotland).The products are listed under the WRAS (Water Regulations Advisory Scheme) WaterFittings and Materials Directory.Zip Water UK cannot be held liable for any damages caused by failure toobserve these instructions.Please leave these instructions with the end user after installation.