Zip HydroTap G4 Series Installation Instructions Manual

Also see for HydroTap G4 Series: Installation instructions Installation instructions Installation instructions User manual Installation instructions

Zip HydroTap G4 Series Installation Instructions Manual Manual pdf 19 page image

802742UK - G4 IS IT industrial installation instructions - Jan. 2016 - V2.03 Page 19 of 32Note 5 Before you install a booster, determine whether an external water filter / softener is required. If anexternal water filter / softener is required, the external bypass valve must be set correctly, see page 23.Booster specificationsRating UnitNominal power rating 2.2 kWNominal current 10 AElectricity supply 50Hz AC 230 VElectrical flex, white - 0.6m nom. length 13 AFixed flow rate 1.2 L/minSection 3Booster systemMount basehorizontally3.1 Product descriptionThe booster system is a compact electronicallycontrolled auxiliary water heater. It is intended toprovide pre-heating of water before it enters the ZipHydroTap®G4 boiling tank. If the booster is used theboiling water output will increase from 160 to 240167ml cups/hour.Note 1 Water connectionblue cap - water inred cap - water out.The braided hoses cannot belengthened.Note 2 The electrical cablelength is 0.6m.Note 3 Position the boosterwithin reach of the fixed hoselengths, keeping the boosteras close as possible to theCommand-CentreTM inlet /outlet connections.Note 4 Ensure the boosteris mounted in anupright position (as shown)with a horizontal base.