46 CP9*, CR9*, CT9* Celeron M/Pentium M Publication No. HRMCP9 Rev. B5.2.11 PMC2 Connectors P7201, P7202PMC2 is available on a CR9 and CT9 without the front Ethernet and/or front VGAconnector. On a CP9 PMC2 is available in the second slotThe following table lists the pin assignments of the PMC2 connector. The PMC slot is32 bit and 33 MHz capable and works with the internal primary PCI bus of the I/OController Hub. The PMC is electrical and mechanical compliant to the specificationIEEE 1386 and 1386.1 with enhancements of the Processor PMC StandardVITA 32-2003. Check for possible height incompatibility in Features andSpecifications sections of this manual. The enhancements provide pins for a seconddevice (IDSELB and REQB/GNTB) but don’t support a monarch PMC card.The PCI signaling voltage is fixed to 5 V for this PMC2. Nevertheless, PMC cardswith 3.3 V or 5 V supply voltage can be used on this PMC slot.
