|
ABEM Terraloc Pro 281• Open a stored record― Press + to open the Quick Menu― Press <2>― Press to select the wanted file― Press • Close the current record― Press + to open the Quick Menu― Press <3>Data TransferIt is highly advisable to make backup copies of recorded data. As with everycomputerized system there is always a slight risk that data could be lost due to hardwarefailure or corrupted data. Guideline Geo cannot take responsibility for recorded datathat is lost.7.2.1 Data Transfer Using the Ethernet PortThis is a function of the Linux operating system and not a specific function of theABEM Terraloc Pro 2. Hence, Guideline Geo cannot be responsible for any problemsthat may occur that isn’t associated with the Terraloc Pro 2 hardware or measurementprograms developed by Guideline Geo.File transfers from your Terraloc Pro 2 to a PC can be done using a network cable. Youwill also need an external USB-keyboard and USB-mouse for the Terraloc Pro 2. Theseparts are supplied with the Terraloc Pro 2 at delivery.Note! If the Terraloc Pro 2 is connected directly to a PC,rather than connected to an existing LAN (Local AreaNetwork), it might be necessary to use a crossednetwork cable. This is not supplied with theinstrument but is available in most computer stores.Another option is to configure the Terraloc Pro 2 for use in a normal office network(LAN) wired or wireless (WiFi); this will not be described in this manual.7.2.2 Data Transfer Using an USB Memory Stick/DriveTerraloc Pro 2 has built in USB 2.0 ports for fast and easy file copying to a USBmemory stick/hard disk. Data can either be copied manually to a USB memory stick byopening the file manager from the start menu (Start menu / Accessories / File ManagerPCManFM), or by using Quick backup found in the Context menu.
|
