aci TUC2 Installation Instructions Manual

Also see for TUC2: Installation & operation instructions

Contents

aci TUC2 Installation Instructions Manual Manual pdf 1 page image

2305 Pleasant View Rd. Middleton Industrial Park Middleton, WI 53562PH: (608) 831-2585 FAX (608) 831-7407I0000621 Rev 6 www.workaci.com 1TUC2 / TUCH2Model Series Installation InstructionsPLEASE READ INSTRUCTIONS CAREFULLY BEFORE INSTALLATION!APPLICATIONThe TUC2 provides temperature space monitoring with a backlit LCD. The TUCH2 providestemperature and relative humidity monitoring with a backlit LCD. Depending on the configuration,the units can display and output Temperature, Relative Humidity, Setpoint, Fan Speed, System Status,and Occupied/Unoccupied Status.The TUC2 and TUCH2 supports single temperature sensor operation for several common sensor typesand it provides the flexibility to choose from numerous setpoint output options. The TUCH2 supportsrelative humidity output in all standard analog signals at 2%, 3%, or 5% accuracy. A setup menuprovides easy output and display configuration changes.INSTALLATIONPrecautions REMOVE POWER BEFORE WIRING. NEVER CONNECT OR DISCONNECT WIRINGWITH POWER APPLIED. DO NOT ALLOW LIVE WIRES TO TOUCH THE CIRCUITBOARD. AN ISOLATION TRANSFORMER IS RECOMMENDED WHEN POWERING THE DEVICEWITH 24VAC. DO NOT RUN THE TUC2 OR TUCH2 WIRING IN ANY CONDUIT WITH LINEPOWERED WIRING. FAILURE TO WIRE DEVICES WITH THE CORRECT POLARITY WHEN USING A SHAREDTRANSFORMER MAY RESULT IN DAMAGE TO ANY DEVICE POWERED BY THESHARED TRANSFORMER.