65Normal Recording MenuNORMAL RECORDINGCAMERAS IMAGES / SEC RESOLUTION1 TO 4 > 5 HIGH2 TO 16 NO RECORDING LOWRECORD ALL SPECIFIED CAMERASCOL B&W 01 02 03 04 05 06 07 0809 10 11 12 13 14 15 1620 IMAGES / SEC OUT OF 25 MAXThis menu sets the images per second and image resolution recorded by each camera duringnormal recording.• CAMERAS – Use the up and down menu buttons to move between items in the menu.Pressing the right and left menu buttons next to a camera group will increase or decreasethe number of cameras in that group respectively.Please note that this applies to the X200-16. The X200-04 lists each of the 4 camerasseparately.• IMAGES / SECNO RECORDING / 0.1 / 0.2 / 0.3 / 0.4 / 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0 / 1.2 / 1.5 / 2.0 / 2.5 /3.0 / 4.0 / 5.0 / 6.0 / 7.0 / 8.0 / 9.0 / 10 / 12 / 15 / 20 / 25 / MAX RATE- This sets the numberof images per second to be recorded by a camera during normal recording up to a total of25 images per second for all cameras added together. If MAX RATE is selected then theX200 will automatically adjust the images per second for each of the specified cameras sothat the total is equal to 25 images per second.• RESOLUTION – This can be set to:LOW – This sets the highest level of compression. Although file sizes will be comparativelysmall, visible blocking artefacts may be seen.MEDIUM – This sets the medium compression level, images with little loss of quality whichwill be adequate for most applications.HIGH – This sets a medium-low level of compression with gains in image quality overmedium resolution but with larger file sizes.V.HIGH – This sets the lowest level of compression with the best image quality but thelargest file sizes.• RECORD ALL SPECIFIED CAMERASONLY RECORD CONNECTED CAMERASThis sets whether the X200 will record on all cameras specified in the recording parametersshown at the top of the menu screen or whether the X200 will only record on connectedcameras shown as highlighted on the connected camera list 01 – 16 at the bottom of themenu screen (01 – 04 on the X200-04).