TROUBLE SHOOTINGProblem Possible Causes Solutions• No audio or video signalis transmitted• The microphone’s sensitivity is too low• The batteries are exhausted or the mainsadapter is not connected correctly to thetransmitter• Increase the microphone’s sensitivity bymeans of the adjustment system• Replace the batteries or verify theconnection• Permanent transmission• The microphone’s sensitivity is too high • Diminish the microphone’s sensitivity bymeans of the adjustment system so that thetransmitter is activated by the voice• Alarm out of rangepermanently activated• The transmitter batteries are exhausted• The distance between the transmitter andthe receiver exceeds the range of action• Replace with new batteries or use the mainsadapter supplied• bring the receiver and the transmitter closertogether• The image on the screenis not homogeneous or is fixedor appears in black and white• The limits of the range of action have beenreached• The light intensity is too weak in the baby’sroom; the unit functions in night vision modeand so uses the infrared LEDs as lightingsource• Move the receiver closer to the camera• Increase the light in the baby’s room• Batteries unchargedsignal still displayed• The batteries are uncharged• The rechargeable batteries are damaged• Recharge the transmitter battery with themains adapter supplied• Replace the batteries• Replace the rechargeable batteries with newbatteries• Lots of static noise and interference• The transmitter is placed besideother electric appliances• Remove the electric appliancesor the transmitter to remove the sourceof interference or select another channel• Range of action too small• There must be a lot of partitions between thereceiver and the transmitter• The transmitter batteries are exhausted• Move the transmitter and the receiver• Replace with new batteries or the mainsadapter suppliedBABYPHONE VISIO CARE 2 • Instruction manual20