baltur GI 350 DSPN Maintenance, Use And Installation Manual

Contents

baltur GI 350 DSPN Maintenance, Use And Installation Manual Manual pdf 10 page image

6 / 280006081143_200905ENGLISHFUEL FEED SYSTEMThe burner pump should receive fuel from a feed circuitwith an ancillary pump which can regulate the pressurevalue from 0,5 to 2 bar, and which is already pre-heatedat 50 ÷ 60 °C.The value of the fuel feed pressure at the burner pump(0,5 ÷ 2 bar) should not vary when the burner is at astandstill or when it is operating at the maximum fueldelivery required by the boiler.The feed circuit must be realized according to drawingn° BT 8511/6 or n° BT 8513/7 even when utilizing lowviscosity fuels.The dimension of the pipelines should be in function withtheir length and with the output of the pump utilized.Our instructions cover the basic requirements neededto ensure efficient operations.All rules and regulations existing in the country of instal-lation should be strictly complied with and the local firebrigade should be consulted.VISCOSITY - TEMPERATURE DIAGRAM