barbas ATLANTA Instruction For Use & Installation Instructions

Contents

barbas ATLANTA Instruction For Use & Installation Instructions Manual pdf 17 page image

18ECO 550ECO 650ECO 750 SAVANNAH ATLANTA5 DISASSEMBLY / ASSEMBLY OF THE REGULATOR AND BURNER5.1 DISASSEMBLY:(see fig. 7 and 8.)1. ATLANTA / SAVANNAH / ECO 550 :Open the glass door by unscrewing the allen socket bolt.ECO 650 :The front is mounted to the casing by “stud” connections in thecorners. Carefully remove the front by pulling it for-wards. Remove thesecuring clips around the glassplate and carefully remove the glass plate.Caution: The edges of the glass plate may be sharp.WEAR GLOVES.ECO 750 :Remove the front by loosen the allens at the bottomside (under thecontrolpanel) and the upperside (in the corners).2. Remove the rack, the log set and the vermiculite granules.3. Remove the support on which the rear log was positioned.4. Remove the bottom plate (grid).5. Loosen the tapered sealing coupling located next to the gas regulatingblock.6. Now take out the complete bottom plate with the burner and gas regulatingblock.Caution: during removal; disconnect the T.T.B. wire connections, of thethermocouple interrupter.