barbas ENERGA 70-55 TUNNEL Installation Instructions Manual

barbas ENERGA 70-55 TUNNEL Installation Instructions Manual Manual pdf 38 page image

38ENERGA 70-55 TUNNELWhen setting the fire, move the locking slider all the way to the right.If necessary, leave the door ajar for 10 minutes. Do not open the door wide, as thewindow will remain cold. If the door is shut during this time, smoke will condense on theglass and form soot.Move the air supply slider all the way to the right “ + ” only when starting the fire.Prevent white glow and over-firing.Note ! :Do not allow both doors to be opened at once.This could allow flue gases to spread unintentionallythrough the living room.7.3 INSTRUCTIONS WHILE STOKINGAfter approx. 10 minutes, the fire will be burning fiercely. You can now top it up with afew larger blocks of wood. Move the locking slide all the way to the left when the blocksare burning well and close the door.Using the air supply slider you can now adjust the air supply for further combustion.Make sure the fire burns quietly.Note: Once you have got the fire going, leave the air supply slider in the centre positionfor optimal combustion. Your fire will then be much cleaner and more efficient (moreheat, less topping up).Centre positionControl range of primary air supplyControl range of secondary andtertiary air supplyCombustion air supply slider