danalock V3 BT HK SCANDI Mounting Manual

Also see for V3 BT HK SCANDI: Mounting guide Manual Manual Manual Manual

danalock V3 BT HK SCANDI Mounting Manual Manual pdf 20 page image

Page 2016. Configuring the Danalock V3 with click-commandsYou can configure the Danalock via the button found in thesmall hole on the top of the lock. When you click throughsettings, the LED will change color according to the followingscheme. When you get to the setting you want to changewait for 5 seconds and the Danalock will react to yourcommand. This gives you plenty of time to navigate to theright command. If you make a wrong number of clicks, juststop at a number of clicks where the LED doesn’t light upand wait for 5 seconds. The LED will flash red to indicatethat it has timed out.Clicks Color Activity2 Yellow Manual calibrationStart by turning the Danalock to the desired unlocked position. Start thecalibration with the click command and wait for the LED to start blinkingyellow. Turn the Danalock to the desired locked position while the LED blinksand click the button once to save the locked position. The Danalock willconfirm with a green blink. If the lock doesn’t receive a response from youwithin 30 seconds the calibration will be canceled.3 White Auto calibrationStart by turning the Danalock to unlocked position and lifting the handle ifneeded. The door has to be left open while the Danalock auto calibrates.Start the auto calibration with the click command. The Danalock will blinkwhite while auto calibrating.