d&b audiotechnik 10AL Manual

Also see for 10AL: Manual

Contents

d&b audiotechnik 10AL Manual Manual pdf 5 page image

2.1. Product descriptionThe 10S, 10A and 10AL and their "D versions" are a family of highperformance 2-way loudspeakers employing a single 10” driver ina bass-reflex enclosure and different HF sections for a wide rangeof installed sound applications. All models are lightweight passivedesigns using neodymium drivers and large horns for accuratepattern control.The 10AL and 10AL-D loudspeakers are the line array modules ofthis family. They provide constant directivity HF line sources witheither 75° or 105° horizontal coverage using dual 1” exit drivers.The cabinets are equipped with an integrated rigging system forthe design of vertical arrays providing application specificdispersion characteristics.With a frequency response extending from 60 Hz to 18 kHz, thecabinets can be used as full range systems or supplemented bydifferent subwoofers of the xS- or xA-Series.The enclosures are constructed from marine plywood with animpact resistant black paint finish. The fronts of the cabinets areprotected by a rigid metal grill backed by an acousticallytransparent foam.The cabinets are Ball Impact Resistant according to DIN 18032-3.Rigging components10AL/10AL-D cabinets are connected to form a vertical arrayeach using the Z5417 Connector plates 10AL. Possible splayangle settings between adjacent cabinets are 0°, 1°, 2°, 4°, 6°,9°, 12° and 15°. A vertical array may consist of up to 9 cabinets.Up to two 18A or 27A subwoofers can be integrated into thearray limiting the maximum number of 10AL/10AL-D cabinets to 6.Vertical arrays are supported using the Z5414 Flying bar xA anda pair of Z5413 Flying bar connector plates xA.Note: For approved configurations as well as safety andmounting instructions, refer to the respective rigging manual.Cabinet optionsThe weather resistant version (WR) is suitable for outdoor use(IP34, vertical aiming up to +15°). The cabinets have an impactand weather protected black PCP (Polyurea Cabinet Protection)finish.Fig. 1: 10AL loudspeakerRigging examples:10AL Line array, 8 deep, with Z5415 Flying bar adapter xA, Z5414 Flying bar xA,Z5413 Flying bar connector plate xA and Z5417 Connector plate 10AL.Ground stack consisting of 10AL and 27A-SUB loudspeakers withZ5417 Connector plate 10AL and Z5418 Connector plate xA-SUB.2. 10AL/10AL-D loudspeakerd&b 10AL/10AL-D Manual (1.2 EN) 5