d&b audiotechnik D6 Software Manual

Also see for D12: Hardware manual Hardware manual Hardware manual Hardware manual Manual

d&b audiotechnik D6 Software Manual Manual pdf 29 page image

2.6.4 Further messagesThe following messages are intended for information on the status ofthe D6. They are no error messages.Standby: indicates that the device is in standby mode.Unlock: Press knob 2s: indicates that the device has been lockedto protect it against accidental or unauthorized operation. Press andhold the encoder for a minimum of 2 seconds until "Lock" disappearsfrom the lower status line of the LCD.2.7 System ResetNote: Following a system reset operation all user settings of the device arelost except for the "dbCAN Id".- Switch off the unit.- Press and hold down the MUTE A switch while switching on thepower supply to the unit again.The following "Reset screen" is displayed:All Settings have beenreset to factory defaultsPress A again to rebootdbCAN active Id 0.01- Release the MUTE A switch and press the MUTE A switch again.The unit will restart and is ready for operation.D6 Software manual (Firmware V1.x.x) (1.1EN) Page 29 of 32

/ 32

Related manuals for d&b audiotechnik D12