                | |
R90 Software3.3 Settings3.3.1 LoginOnce the device has booted, selecting «Settings» at the bottomright of the touchscreen opens the R90 log in screen.By factory default, the login data is:User name: AdminPassword: AdminSelecting the «View» button, shortly displays theentered password for verification.If you are inactive for more than 15 minutes, you will be loggedout automatically. A new login is required.To change your system configuration, navigate to "«Settings»Þ «System config»".To change your project settings, navigate to "«Settings»Þ «Project setup»".3.3.2 System configurationChange passwordNavigate to «Settings» Þ «System config» Þ «Password».To change your password, please proceed as follows:1. Enter your user name.2. Enter the new password.↳ Selecting the «View» button, shortly displays the enteredpassword for verification.3. Confirm your new password.4. Select «Save» to apply your new password.Firmware updateA new firmware can be loaded and installed via the USB ports ofthe device. The folder with the new unzipped firmware packagemust be stored in the root directory of the USB drive.To update your firmware, please proceed as follows:1. Download the latest firmware from www.dbaudio.com.2. Extract the *.zip file into the root directory of your USB stick.3. Insert your USB drive to one of the USB ports of the device([X104] or [X105]).4. Navigate to Settings Þ System config Þ Firmware update.5. Select «Copy firmware package».↳ The system will reboot automatically and install the newfirmware.6. Remove the USB drive.Change passwordd&b R90 Manual 1.2 en8 |
manualsdatabase
Your AI-powered manual search engine