dbx DriveRack 220i User Manual

Also see for DriveRack 220i: User manual Manual 

dbx DriveRack 220i User Manual Manual pdf 15 page image

®Configuration of the DriveRack units is done in Unit view. The DriveRack 220i configurationcan be changed by clicking on the CONFIG button. Once the CONFIG button has beenclicked, the modules can be changed by right clicking on the module to be changed. Forexample, if you want to change the processing module in one of the inserts, you simply right-click on that module and you will be able to select another processing block as well as unlinkthat module (if it is stereo linked). To link modules in stereo, click on one of the module thatyou want to link. While holding the Ctrl button click the other module that you want to linkit to; both modules should now be highlighted. By right-clicking on either module you cannow select LINK. Once the desired configuration is created you must click the CONFIG but-ton once more to load the configuration.To edit a processing module double click on that module. Adjust the module to taste; makesure that the module is engaged, this is usually indicated by the module on button in the upperleft corner of the parameter section. Although process editing is done in real-time, the changescan either be discarded or accepted by selecting the OK or CANCEL button.Parameters can be copied and pasted between channels in the DriveRack devices. From theprogram screen right click on the module that you want to copy and select Copy. To paste,right click on a like module and select Paste. Obviously you cannot copy parameters to andfrom unlike modules, for example from a Compressor to a Parametric EQ.2. 6 - Copy and Paste2. 5 - Editing2. 4 - ConfigurationSoftware Operation Section 2220i7DriveRack® User Manual